[PM246S]How to Avoid Printing Blank Content

[PM246S]How to Avoid Printing Blank Content

1. Make sure your labels are Thermal paper and the print side facing up.


















Info
Please make sure the tear-off side of the label is facing up.

2.Please make sure you are using the original 24V-2.5A power adapter.



3. Reset the printer

3.1 Press the button on the printer：

A. Insert the label and make sure it is straight and smooth. When the printer is in standby mode, press and hold the feed button for about 10 seconds.
B. After the blue light flashes 4 times, release the feed button.
Video guide:


3.2 Reset the printer from Windows：

















3.3 Reset the printer from Mac：



Info
If the above methods cannot help you, please provide us with the following information to our email: bestservice2012@outlook.com
1.Try printing a test page：
A. Insert the label and make sure it is straight and smooth. When the printer is in standby mode, press and hold the feed button for about 10 seconds.
B. After the blue light flashes 4 times, release the feed button.
Video guide:

2. Please take some photos or videos of the situation you mentioned and photos of the power adapter parameters for us to check.
3. Please provide us with your order number and date of purchase.

    • Related Articles

    • [PM241BT] How to Avoid Printing Offset Content

      When the PM241BT printer prints different types of labels, different content offsets may occur. The following are the reasons why the printer may have print offsets. 1.Print Label Content is Offset Up and Down (As shown in the figures) When you use a ...

    • [PM344WiFi] How to Avoid Printing Blank Content

      1. Make sure your labels are Thermal paper and the print side facing up. Please make sure the tear-off side of the label is facing up. 2.Please make sure you are using the original 24V-2.5A power adapter. 3. Reset the paper feed button to factory ...

    • [PM344WiFi] How to Avoid Printing Blurred Content

      If you use the PM344WiFi printer to print labels and find that the printing effect of the labels is not good enough, some places are blurry, please pay attention to the following information. 1. Check the Printer Head If there is paper residue or ...

    • [PM344WiFi] How to Avoid Partial Loss of Printed Labels

      If you find that the printed label content is partially missing and blank when you are using the printer to print labels, please pay attention to the following information. 1. Check the Print Head Check if there is paper glue residue and dirt on the ...

    • The Reason of PM241BT Prints Label Content too Large or too Small

      If the label content printed by the printer is very small or very large when you use a mobile phone or computer to print (as shown in the figure), you can continue to browse the article information below. 1. When downloading labels from ...